Rj-45 Connector Pin Assignments - Nortel 5500 series Installation Manual

2
3
4
5

RJ-45 connector pin assignments

The following section outlines the connector pin assignments for the RJ-45
connectors in the Nortel Ethernet Routing Switch 5500 Series switches.
Consult the appropriate section for specific information on an individual
switch:
•
Copyright © 2005 - 2006, Nortel Networks
.
Use the locking/extractor mechanism on the transceiver to release it.
The locking/extractor mechanism varies from model to model.
Transceiver locking/extractor mechanism examples
Slide the transceiver out of the module slot.
If the transceiver does not slide easily from the module slot, use a
gentle side-to-side rocking motion while firmly pulling the transceiver
from the slot.
Attach a dust cover over the fiber optic bores and store the
transceiver in a safe place until needed.
Note: Transceivers should be discarded in accordance with the
proper laws and regulations.
"Nortel Ethernet Routing Switch 5510-24T and 5510-48T" (page 28)
Nortel Ethernet Routing Switch 5500 Series
NN47200-300 2.00 Standard
5.0 7 July 2006
RJ-45 connector pin assignments 27
—End—
Installation
Nortel Networks Confidential