Removal Of Electrical Parts Box / Pcb / Swing Motor - Daikin FT25CV1A Service Manual

FT25/35CV1A, FTY25/35CVMA
1.4 Removal of
Procedure
Step
Remove the front grill.
1. Remove the electrical
parts box.
Disconnect the
1
connection wires.
Disconnect the
2
connectors of fan motor
(S1 and S7).
Disconnect the
3
connector of swing
motor (S6).
4 Remove heat
exchanger thermistor.
134
Electrical Parts Box / PCB / Swing Motor
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Si01-406
Points
Pay attention to the direction
of the retainer of the
thermistor so that the
retainer will not touch the
harness (same as the
existing models.)
Removal Procedure