Daikin FT25CV1A Service Manual page 141

FT25/35CV1A, FTY25/35CVMA
Step
2. Remove the front grille
assembly.
1 Remove the two
screws, in the right and
the left, which fix the
main body with the front
grille.
2 Disengage the two
hooks on the upper
part.
In case that the hooks
are not pressed from
above, remove the front
panel and then remove
the grille while pushing
the hook through a
clearance between the
front grille and the heat
exchanger.
130
Procedure
Si01-406
Points
Screw stoppers inside the
flap which were equipped in
the existing models are not
provided.
At the upper part there are
two hooks in the left and the
right.
Disengage the hooks by
pressing knobs with a
screwdriver.
Removal Procedure