Daikin FT25CV1A Service Manual page 177

R25/35CV1A, RY25/35CVMA
Step
2 The top plate and the
front plate are
constructed in a
monoblock. Remove
the three screws at the
right side and the two
screws at the front
plate.
Remove the three
3
screws at the left side.
4 Remove the one fixed
screw in the rear of the
top plate. Once lift the
top plate and then
remove it forward.
5 The front plate and the
left side plate can be
removed when the one
fixed screw is removed.
166
Procedure
Si01-406
Points
The left side plate and the
bellmouth can be removed
all at once.
When restoring the top plate,
move it horizontally and get
it down for the easy work.
Sectional view at the front.
Top plate
the top plate edge is
gotten into this groove.
Left side
plate
(R1853)
Removal Procedure