Understanding Wg302 Wireless Security Options - NETGEAR ProSafe WG302 Reference Manual

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG302
Feature
IP Configuration
802.11g Network Name (SSID)
Broadcast Network Name (SSID)
802.11g Radio Frequency Channel
Super-G Mode
WEP/WPA
MAC Access Control
AutoCell RF Management
AutoCell Enhanced RF Security
AutoCell Rogue Device Detection
Restricting connectivity based on MAC Access
Control List
Time Zone
Time Zone Adjust for Daylight Saving TIme
SNMP
VLAN (802.1Q)
Load Balancing
WMM Support

Understanding WG302 Wireless Security Options

Your wireless data transmissions can be received well beyond your walls by anyone with a
compatible adapter. For this reason, use the security features of your wireless equipment. The
WG302 Wireless Access Point provides highly effective security features which are covered in
detail in this chapter. Deploy the security features appropriate to your needs.
Basic Installation and Configuration
Factory Default Settings
IP Address: 192.168.1.128
Subnet Mask: 255.255.255.0
Gateway: 0.0.0.0
NETGEAR-0
Enabled
Managed automatically by AutoCell (default), if AutoCell is
disabled, channel 11 is the default
Disabled
Disabled
Disabled
Enabled
Disabled
Disabled
Disabled
GMT
Disabled
Disabled
Disabled
Disabled
Disabled
v0.1, December 2005
3-3