Installing The Postscript 3 Printer Driver (Windows 2000) - Ricoh SP 3400N Operating Instructions Manual

Preparing for Printing

Installing the PostScript 3 Printer Driver (Windows 2000)

Important
1 ❒ To install this printer driver, you must have an account that has Manage
Printers permission. Log on as an Administrators group member.
If the printer driver has already been installed, plug and play is enabled, and the
icon of the printer connected to the "USB" port is added to the [Printers] window.
If the printer driver is not installed, follow the plug and play instructions of the
printer to install it from the CD-ROM provided.
A
Check the printer's power switch is turned to off.
B
Connect the printer and computer using the USB cable.
Connect the USB cable firmly.
C
Turn the printer's power switch back to on.
Plug and play is enabled and the [Found New Hardware Wizard] dialog box ap-
pears, and USB Printing Support is installed automatically.
D
In the [Found New Hardware Wizard] dialog box, click [Search for a suitable driver
for my device (recommended)], and then click [Next >].
E
Select the [Specify location] check box, and then click [Next >].
F
Insert the CD-ROM into the CD-ROM drive.
When Auto Run starts, click [Exit].
G
Specify the location where the source files of the printer driver are stored.
If the CD-ROM drive is D, the source files of the PostScript 3 printer driver
are stored in the following location:
D:\DRIVERS\PS\XP_VISTA\(Language)\DISK1
H
Check the printer driver location, and then click [OK].
I
Click [Next >].
18