Ricoh SP 3400N Operating Instructions Manual page 167

Configuring the SNMP Settings
Click the [SNMP] tab on the network settings page to configure the SNMP settings.
❖ SNMP Setting
Item
SNMP
❖ Trap
Item
Target Trap
SNMP Management Host 1
SNMP Management Host 2
❖ Community
Item
Get Community
Trap Community
Description
Select whether to enable the printer to use
SNMP services.
Description
Select whether to enable the printer to send
traps to the management host (NMS).
Enter the IP address or host name of a manage-
ment host. Can contain up to 32 characters.
Enter the IP address or host name of a manage-
ment host. Can contain up to 32 characters.
Description
Enter the community name to use for authen-
tication of Get requests. Can contain up to 32
characters.
To search for this printer in Smart Organizing
Monitor, specify "public".
Enter the community name to use for authen-
tication of Trap requests. Can contain up to 32
characters.
Using Web Image Monitor
4
49