Ricoh SP 3400N Operating Instructions Manual page 234

Using Smart Organizing Monitor under the Macintosh Environment
Registration: Duplex Tray
When the duplex tray is installed and duplex print is enabled, you can adjust the
position of the back side print if necessary.
v [Print Test Sheet]
Click this button to check the printing position using a test print.
• Horizontal
After printing the test sheet, you can adjust the horizontal print position in
the range of from -15 to +15 in increments of 0.1 mm.
• Vertical
After printing the test sheet, you can adjust the vertical print position in the
range of from -15 to +15 in increments of 0.1 mm.
6