Ricoh SP 3400N Operating Instructions Manual page 239

[Network 2] Tab
Use this page to enter administrative information related to the network.
To display or configure a setting, select it in the list.
The following menus are available in the list.
• SMTP
• SNMP
SMTP
v SMTP Authentication
Select whether to log on to the SMTP server using SMTP AUTH for sending
e-mail.
v Port Number
Enter the port number used for sending e-mail to the SMTP server. Enter a
value between 1 and 65535.
v SMTP Server Name
Enter the IP address or host name of the SMTP server using up to 32 characters.
Note
r When the SMTP server host name is specified, a DNS server must be set up
so the IP address can be obtained from the host name (forward lookup).
v User Name
Enter the SMTP account name to be used when [SMTP Authentication] is set to
[On]. Use up to 32 alphanumeric characters.
v Password
Enter the SMTP account password to be used when [SMTP Authentication] is en-
abled. Use up to 32 alphanumeric characters.
v E-mail Address
Enter the e-mail address used for e-mail notification. Use up to 64 alphanu-
meric characters.
SNMP
v Get Community
Enter the name of the community to which the network interface board be-
longs, using up to 15 alphanumeric characters. Only requests from hosts
whose community name matches the name you set here will be accepted.
To search for this printer in Smart Organizing Monitor, specify "public".
v Manager IP Address
Enter the host computer's IP address.
To have requests accepted from any host, set the address to "0.0.0.0".
Printer Configuration
11