Ricoh SP 3400N Operating Instructions Manual page 182

Monitoring and Configuring the Printer
❖ Tray Priority
Select the priority tray from the [Default Tray:] list, when the optional paper
feed unit is attached to the printer.
❖ Bypass Tray
• Paper Size
The following sizes are available:
A4 (210 x 297 mm), B5 JIS (182 x 257 mm), A5 (148 x 210 mm),
B6 JIS (128 x 182 mm), A6 (105 x 148 mm), 8 1/2 x 14, 8 1/2 x 11,
5 1/2 x 8 1/2, 7 1/4 x 10 1/2, 16K, 4 1/8 x 9 1/2, 3 7/8 x 7 1/2,
C5 Env, C6 Env, DL Env, Custom Paper Size
• Paper Type
The following paper types are available:
Thin Paper, Thick Paper 1, Thick Paper 2, Plain Paper 1, Recycled Paper,
4
Color Paper, Preprinted Paper, Prepunched Paper, Letterhead, Bond Paper,
Cardstock, Labels, Envelope, OHP
• Custom Paper Size
You can make the custom paper size settings, when [Custom Paper Size] is
selected.
• Unit:
Specify the unit of measurement in "mm" or "inch".
• Horizontal:
Specify the horizontal width between 90 and 216 mm (3.54 and 8.50
inch).
• Vertical:
Specify the vertical length between 140 and 356 mm (5.51 and 14.02
inch).
Note
❒ The paper settings are not available for the bypass tray.
❒ Tray 2 is available only when the optional paper feed unit is attached to the
printer.
Adjusting registrations
On the [Maintenance] tab, you can adjust print starting positions.
Normally, you do not have to adjust registrations. However, adjustments could
be useful in some cases, especially when you want to print in a specific position.
Under [Registration: Tray 1], [Registration: Tray 2], [Registration: Bypass Tray], and
[Registration: Duplex Tray] you can adjust the print image position printed on the
sheet fed from each tray. To check the adjustment result, use [Print Test Sheet].
64