Connecting The Power Supply - Mitel MiVoice 5380 User Manual

Connecting your PC to the LAN
If required, you can connect your PC or another LAN device to the phone, for example a
printer.
• Connecting the LAN cord (not included in the scope of delivery) to the PC's network
socket.
• Plug the connector at the loose end on the underside of the phone into the PC socket.
• Desk installation only: To relieve the strain on the cable feed the cable through one of
the cable guides on the stand rest.

Connecting the power supply

If your LAN supports Power-Over-Ethernet (PoE), the phone will be powered via the LAN
cord and you will not require a power adapter.
If your LAN does not support PoE or if you have installed a switch between the LAN and
the phone that does not support PoE, you will need the optional power adapter to power
the phone.
Note:
Only use the optional original plug-in power adapter.
• Plug the round connector of the power cord on the underside of the phone into the
power socket.
• Desk installation only: To relieve the strain on the cable feed the cable through one of
the cable guides on the stand rest.
• Connect the power supply to the mains power.
Logging the IP phone
Your system administrator has to prepare the system before you can log on your phone.
MiVoice 5380 / MiVoice 5380 IP
eud-1679/1.0 – R3.0 – 08.2015
Installation and first-time operation
135