Formulating Functions - Mitel MiVoice 5380 User Manual

Personalizing your phone

Formulating functions

This section explains how to activate an individual function, for example call for-
warding unconditional, with the aid of function commands and function codes and
how to assign it to a key.
Function commands, function codes
You can use the predefined selection to allocate functions to a configurable key (see
chapter "Store a function under a key – function key", page 95). You can also write your
own functions using function commands and function codes (select
function). The function commands are listed here; the function codes can be found in the
User's Guide User Guide Function Codes on the
You can use function commands to define a function to suit your personal requirements.
A function can consist of one or more function commands, function codes, and the phone
number.
The following function commands are available:
"A"
"I"
"H"
"X"
"P"
"Lxx"
"N"
"."
"Z"
"R"
"Y"
Other formulation examples:
"IR"
"I201"
"I*21201X"
102
Seize line with highest priority
Seize line
Seize line in hands-free mode
Disconnect
Pause 1 second before the next operation
Seize line xx (Line keys)
Use the phone number entered in call preparation
Control key function (up-circuit system)
Activate/deactivate DTMF mode
Use the phone number last dialled
Disconnect and reseize the line
Seize line ("I"),
Dial phone number last dialled ("R")
Seize line ("I") and dial phone number 201
Seize line ("I"),
activate call forwarding unconditional ("*21") to phone number 201,
disconnect ("X")
Mitel DocFinder.
MiVoice 5380 / MiVoice 5380 IP
Free configurable
eud-1679/1.0 – R3.0 – 08.2015