Wall Mounting - Mitel MiVoice 5380 User Manual

Installation and first-time operation

Wall mounting

You can also mount the phone on the wall. To do so, screw the stand rest onto the wall as
a bracket and hook the phone onto the stand rest.
Notes:
• As there is only a limited amount of space between the sockets on the back of the
phone and the wall on which it is mounted, you need to use a ribbon cable with a short
connector for the cord. Ask your dealer for a list of suppliers for a suitable ribbon cable
(only MiVoice 5380 IP).
• You can only connect one MiVoice M530 and one MiVoice M535 (option) if the phone
is wall-mounted.
• Fit the screws for securing the stand rest and mount the stand rest (Figure A).
• Connect the handset and phone cord to the phone (Figure B). For the correct connec-
tion assignment refer to Chapter "Connect MiVoice 5380", page 133 and "Connect
MiVoice 5380 IP", page 134.
• Insert the phone into the stand rest horizontally (Figure C-1) and slide downwards (Fig-
ure C-2).
• Unscrew the cams for holding the handset (Figures D-1 to D-3).
• Insert the handset.
3.5 mm
1
132
151 mm
A
2
C
B
1
2
3
D
MiVoice 5380 / MiVoice 5380 IP
eud-1679/1.0 – R3.0 – 08.2015