Display; Keys - Mitel MiVoice 5380 User Manual

Display

Display symbols and display text
New events such as a call in your absence, a new message or activated functions (e.g.
Forwarding) are signalled on the display in the idle state by a symbol or a display text.
You can then use the relevant Foxkey to call up the information.
>>
Close

Keys

Using the Foxkey
The Foxkey has variable functions. These functions are displayed above the key. Several
contacts are stored under the broad Foxkey, which means you need to press the Foxkey
precisely under the function you want.
<long>
Using the MiVoice M535 expansion key module
The configurable keys of the expansion key module MiVoice M535 can be operated as
the other configurable keys. In addition, there are the following extensions:
• If you remove a MiVoice M535 or if you modify the order of the connected expansion
key modules, the keys configuration does not change.
MiVoice 5380 / MiVoice 5380 IP
eud-1679/1.0 – R3.0 – 08.2015
If more Foxkeys are available:
Press the Foxkey.
>>
Retrieving detailed information:
Press the right navigation key.
Function activated:
The activated function or selected setting is indicated by a check
mark.
Deleting the display text:
Press the Foxkey.
Close
The display returns to the idle state; the function remains activated.
➔
Press the Foxkey on the place where the function you want appears
on top of the display.
Keep the Foxkey held down for a moment (about 2 seconds).
Using the display and operating elements
25