Connecting To The Network And To Power - Mitel 6863i Installation Manual

Connecting to the Network and to Power

Power Adapter
Use the power adapter (sold separately) with your phone and plug your phone into a power source.
Alert!
For power, use only the GlobTek Inc. LPS adapter model no. GT-41080-1848 (sold separately) to connect from the DC
power port on the phone to a power source.
Inline Power
If your network provides 802.3af compliant inline power, the phone is powered through the network.
1. On the back of your phone, connect an Ethernet cable into the network port marked with
2. Plug the other end of the Ethernet cable directly into the network jack on the wall.
Network Jack
(if inline power provided)
41-001505-00 REV02 – 10.2014
Ethernet Cable
j
Installation and Setup
.
j
To Network
6