Setting The Ringing Properties (Audio) - Mitel MiVoice 5380 User Manual

Setting the MiVoice M535 display
You can adjust the
The backlight setting for the display of the MiVoice M535 is taken from the phone.
Menu
Settings
Display
<Display setting>

Setting the ringing properties (Audio)

This section explains how to set your phone's ringing tone properties.
Setting the ringing volume during ringing
You want to adjust the ringing volume.
You can adjust the ringing volume while the phone is ringing.
Setting the volume during a call
You want to adjust the volume while in a call. You have to set the volume of handset and
loudspeaker separately.
The new volume will remain stored even after the call is ended.
Note:
The volume cannot be modified if you are in a call in edit mode and if the DTMF mode is
activated (see Chapter "Configuring the DTMF mode", page
MiVoice 5380 / MiVoice 5380 IP
eud-1679/1.0 – R3.0 – 08.2015
M535 display contrast
Press the Foxkey.
Menu
Scroll to
Settings
Scroll to
Display
Scroll to the required display settings and press the
Select the required setting and confirm with the
➔ The setting is stored.
Quieter: Press the –-key.
Louder: Press the +-key.
Quieter: Press the – key during the call.
Louder: Press the + key during the call.
and the
M535 backlight
and press the
Select
and press the
Select
Personalizing your phone
intensity.
Foxkey.
Foxkey.
Modify
Foxkey.
Ok
84
).
Foxkey.
77