Personalizing your phone
Configuring the DTMF mode
You want to decide whether the DTMF mode is to be activated or deactivated as default
on your phone.
Menu
Settings
General
DTMF
<DTMF setting>
Changing the PIN
You want to change the PIN used to lock/unlock your phone (see chapter "Locking your
phone", page 52 and "Unlocking your phone", page 53).
The digit combination "0000" is set as default. You can select any 2 to 8-digit combination
for your new PIN.
If you have forgotten your PIN, your system administrator can reset it to the default set-
ting. Depending on the system settings the function may not be available.
Note:
Your PIN applies to all your phones.
Menu
Settings
General
84
Press the
Foxkey.
Menu
Scroll to
and press the
Settings
Scroll to
and press the
General
Scroll to
and press the
DTMF
Activate or deactivate DTMF and confirm with the
The setting is stored.
➔
Press the
Foxkey.
Menu
Scroll to
and press the
Settings
Scroll to
and press the
General
Foxkey.
Select
Foxkey.
Select
Foxkey.
Modify
Foxkey.
Select
Foxkey.
Select
MiVoice 5380 / MiVoice 5380 IP
Foxkey.
Ok
eud-1679/1.0 – R3.0 – 08.2015