Power The Base Station With A Local Power Supply - Mitel Base Station Installation Manual

Installation Guide
Base Station

3.3.3 POWER THE BASE STATION WITH A LOCAL POWER SUPPLY

Powering the base station with a local power supply can be done using the second
data/power inlet on the base station. The base station can be powered individually by
an AC-adapter. The AC-adapter is provided with an 8-pin RJ45 plug that can be
plugged into the Power Supply jack. For specification see
Only approved power supply according to valid editions of EN/IEC/CSA/UL/AU/NZS
60950 is to be used when the base station is powered by a local power supply.
32/1531-ANF 901 43 Uen B2 2016-04-01
2.5 AC-adapter on page 14.
23