Using a headset
To make a phone call with the headset.
If you answer a call in headset mode using the Call key or Loudspeaker key, the call is
provided on the headset. Alternatively you can also answer the call by picking up the
handset.
Notes:
• A corded and a Bluetooth headset cannot be connected in parallel.
• If you loose the radio contact with a Bluetooth headset, you can go back into the radio
area without being disconnected from the active connection.
Open listening
Hands-free
Headset
MiVoice 5380 / MiVoice 5380 IP
eud-1679/1.0 – R3.0 – 08.2015
Your phone is ringing and the indicator LED is flashing. To answer
the call, proceed as follows:
Press the Call key or Loudspeaker key.
The call is provided on your headset.
➔
Press the
Open listening
The phone's loudspeaker is activated.
➔
Press the
Hands-free
The phone's microphone is switched on and the headset microphone
➔
is switched off.
Press the
Headset
Back to the headset mode.
➔
Ending a call:
Press the End key or Loudspeaker key.
Notes:
• To find out how to activate the headset, refer to the chapter "To acti-
vate headset mode", page 79.
• To find out how to connect a Bluetooth headset, refer to chapter "Acti-
vate Bluetooth operation and Bluetooth device (MiVoice 5380 /
5380 IP only)", page 82.
• To call a user, select the user's phone number and press the Call key
or Loudspeaker key.
• For more information refer to your headset's operating instructions.
Foxkey.
Foxkey.
Foxkey.
Dialling and phoning
23