Shared Network Connection; Connecting To The Network And To Power; Power Adapter - Mitel 6867i Installation Manual

SHARED NETWORK CONNECTION

To connect a network device (such as a computer) to the phone, connect an Ethernet cable
into the network port on the back of the phone marked with
Ethernet cable into the network jack on the network device for which you are sharing the network
connection.
Notes:
1. The PC jack on the 6867i SIP Phone does not supply inline power onto other network
devices.
2. All Ethernet cables used must be minimum Category 5/5e straight-through cables.

CONNECTING TO THE NETWORK AND TO POWER

POWER ADAPTER

Use the power adapter (sold separately) with your phone and plug your phone into a power
source.
WARNING: FOR POWER, USE ONLY THE GLOBTEK INC. LPS ADAPTER MODEL
NO. GT-41080-1848 (SOLD SEPARATELY) TO CONNECT FROM THE DC POWER
PORT ON THE PHONE TO A POWER SOURCE.
Installation and Setup
. Plug the other end of the
8