Forwarding To A Message - Mitel MiVoice 5380 User Manual

Forwarding to voice mail
You cannot momentarily be reached on your phone. If you forward to your voice mail, a
user can leave you a voice message.
You can use the global greeting or your own greeting (see chapter "Configuring voice
mail", page 90).
For further information on voice mail refer to the User Guide Voice Mail Systems on the
Mitel DocFinder.
Notes:
• One diversion applies to all connected phones, in one number user concept.
• Only one forwarding variant at a time is possible.
Menu
Forwarding
Call Forwarding
Voice mail

Forwarding to a message

You cannot be reached on your phone. You want any internal user who calls you to get a
text message. The user hears the busy tone and obtains a text message on his display.
Requirement: The internal user must have a phone capable of receiving text messages.
Users whose phone cannot receive text messages are put through to your phone or
rerouted to a destination predefined within the system.
You can use one of the text messages stored in the system directly, modify it or create a
new message.
MiVoice 5380 / MiVoice 5380 IP
eud-1679/1.0 – R3.0 – 08.2015
Press the Foxkey.
Menu
Scroll to
Forwarding
Scroll to
Call Forwarding
Scroll to
Voice mail
Forwarding is activated.
➔
Notes:
• You can specify whether your voice mail should answer directly
forwarding) or with a delay
already on the phone
• You can deactivate forwarding using
Reset.
• A new voice message is signalled with a text message on the display
and a lit indicator LED in the idle state.
and press the
Select
and confirm with the
and confirm with the
(Forwarding on no
(Forwarding if busy
Supplementary features
Foxkey.
Foxkey.
Ok
Foxkey.
Ok
reply) or only if you are
).
>
Menu Activated features
(Call
>
51