Muffler; Exhaust Pipe - Honda CBF600SA Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.

MUFFLER

REMOVAL/INSTALLATION
Loosen the muffler band bolt.
Remove the muffler mounting nut, bolt, washer and
collar.
Remove the muffler and gasket.
Installation is in the reverse order of removal.
Tighten the muffler mounting nut to the specified
Always replace the
torque.
gasket with a new
one.
TORQUE: 22 N·m (2.2 kgf·m, 16 lbf·ft)
Tighten the muffler band bolt to the specified
torque.
TORQUE: 22 N·m (2.2 kgf·m, 16 lbf·ft)

EXHAUST PIPE

REMOVAL
Remove the muffler (page 2-11).
Remove the right side cover (page 2-5).
Disconnect the O
Remove the exhaust pipe joint nuts.
Remove the exhaust pipe mounting nut, washer
and bolt.
Remove the exhaust pipe and gaskets.
email: info@motomatrix.co.uk
sensor 4P (Black) connector.
2
FRAME/BODY PANELS/EXHAUST SYSTEM
MOUNTING COLLAR
BOLT
NUT
MUFFLER
4P (Black) CONNECTOR
MOUNTING BOLT
WASHER
NUT
WASHER
BAND BOLT
GASKET
GASKETS
JOINT NUTS
EXHAUST PIPE
2-11