Rear Wheel - Honda CBF600SA Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.

REAR WHEEL

REMOVAL
Loosen the rear axle nut.
Support the motorcycle using a safety stand or a
hoist, raise the rear wheel off the ground.
Loosen the lock nut and drive chain adjusting nut
and make a drive chain slack fully.
Remove the axle nut, washer and rear axle washer.
Derail the drive chain from the driven sprocket
Remove the rear axle and axle washer, then remove
Do not operate the
the rear wheel.
brake pedal after
the rear wheel is
removed.
CBF600SA/NA: Be
careful not to
damage the speed
sensor on the brake
caliper.
Remove the side collars.
INSPECTION
Axle
Place the axle in V-blocks and measure the runout.
Actual runout is 1/2 the total indicator reading.
SERVICE LIMIT: 0.2 mm (0.01 in)
email: info@motomatrix.co.uk
REAR WHEEL/SUSPENSION
LOCK NUT
AXLE NUT/WASHER
ADJUSTING NUT
AXLE WASHER
DRIVE CHAIN
LEFT SIDE:
SIDE COLLARS
AXLE WASHER
AXLE
RIGHT SIDE:
AXLE
14-7