Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
Remove the wheel speed sensor from the caliper
bracket.
Clean around the mounting area of the caliper
bracket thoroughly, and be sure that no foreign
material is allowed to enter the mounting hole.
Install a new speed sensor in the reverse order of
Route the sensor
removal.
wire properly (page
1-24).
After installation, check the air gap (page 16-24).
ABS MODULATOR
REMOVAL
Drain the brake fluid from the front and rear hydrau-
lic systems (page 15-7).
Remove the rear fender (page 2-7).
Pull the lock lever up and disconnect the ABS modu-
lator 25P connector.
Loosen the brake pipe joint nuts and disconnect the
When loosening
brake pipes.
the joint nuts, cover
the end of the
brake pipes to
prevent
contamination.
Remove the modulator side mounting bolt/washer.
email: info@motomatrix.co.uk
ANTI–LOCK BRAKE SYSTEM (ABS; CBF600SA/NA)
WHEEL SPEED SENSOR
25P CONNECTOR
JOINT NUTS
LOCK LEVER
BOLT/WASHER
16-27