Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
IMMOBILIZER INDICATOR
(N/NA model)
Remove the headlight unit (page 20-7).
Disconnect the combination meter 9P (Natural) and
9P (Black) connectors.
POWER INPUT LINE INSPECTION
Measure the voltage between the Black/brown (+)
and Green/black (–) wire terminals.
There should be battery voltage when the ignition
switch is turned to "ON".
IMMOBILIZER INDICATOR LINE
INSPECTION
Measure the voltage between the White/red wire
terminal (+) and ground (–).
There should be battery voltage when the ignition
switch is turned to "ON".
• There should be no voltage for approx. two sec-
onds after the ignition switch is turned to "ON",
then the battery voltage should appear, if the
system is normal.
email: info@motomatrix.co.uk
IMMOBILIZER SYSTEM (HISS)
9P (BLACK) CONNECTOR
9P (NATURAL) CONNECTOR
Viewed from harness side/
the 9P (Black) connector:
Green/black
Viewed from harness side/
the 9P (Natural) connector:
Black/blown
White/red
21-13