Seat; Seat Bracket - Honda CBF600SA Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
FRAME/BODY PANELS/EXHAUST SYSTEM

SEAT

REMOVAL/INSTALLATION
Unhook the pillion seat with the ignition key.
Remove the pillion seat.
Remove the socket bolts.
Remove the main seat backward while releasing the
seat hook from the frame hook.
Install the main seat, inserting the hook into the
frame hook.
Install the socket bolts.
Install the pillion seat and push the seat forward,
then down to lock it.
After installation, make sure that the seat is installed
properly by moving the seat.

SEAT BRACKET

REMOVAL/INSTALLATION
Remove the four socket bolts.
Remove the seat bracket.
If you wish the seat position upward or downward,
you can choose low or high position.
There are three bolt holes each mounting point.
Middle bolt hole is standard position.
Install the seat bracket.
Install and tighten the socket bolt to the specified
torque.
TORQUE: 22 N·m (2.2 kgf·m, 2.2 lbf·ft)
After installation, make sure that the seat bracket is
installed properly by moving the bracket.
2-4
email: info@motomatrix.co.uk
HOOKS
PILLION SEAT
HOOK
BOLTS
SEAT
SOCKET
BOLTS
SEAT BRACKET