Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
Install the flywheel to the crankshaft.
Apply engine oil to the flywheel bolt threads and
seating surface.
Install the washer and flywheel bolt.
Hold the flywheel using the special tool, then
tighten the bolt to the specified torque.
TOOL:
Flywheel holder
TORQUE: 113 N·m (11.5 kgf·m, 83 lbf·ft)
ALTERNATOR COVER INSTALLATION
Apply sealant to the mating surfaces of the alterna-
tor cover and crankcase.
email: info@motomatrix.co.uk
FLYWHEEL HOLDER
07725-0040001 or
equivalent commer-
cially available
Cover side:
Crankcase side:
10 – 15 mm
(0.4 – 0.6 in)
10 – 15 mm
(0.4 – 0.6 in)
ALTERNATOR
BOLT
FLYWHEEL
WASHER
10-7