Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
SIDE COVER
REMOVAL/INSTALATION
Remove the socket bolt.
Release the rear tabs from the swingarm pivot
bracket and fuel tank grommets, then remove the
side cover.
Install the side cover aligning the its tabs with the
grommets in the swingarm pivot bracket and fuel
tank.
Install and tighten the socket bolt to the specified
torque.
TORQUE: 4 N·m (0.4 kgf·m, 3.0 lbf·ft)
REAR COWL
REMOVAL
Remove the seat (page 2-4).
Remove the side cover (page 2-5).
Remove the bolt caps.
Remove the socket bolts and grab rail.
Remove the socket bolts and rear center cowl.
Remove the socket bolts and special bolts/collars.
Remove the trim clips.
Carefully release the tabs of the rear cowl from the
grooves on the taillight unit, then remove the right/
left rear cowl.
email: info@motomatrix.co.uk
FRAME/BODY PANELS/EXHAUST SYSTEM
TABS
SOCKET BOLTS
SPECIAL BOLT/COLLAR
REAR COWL
SOCKET BOLT
GROMMETS
SIDE COVER
SOCKET BOLT
SOCKET
REAR CENTER
BOLTS
COWL
BOLT
CAPS
GRAB RAIL
TABS
TRIM CLIP
2-5