Installing A Secure Digital Card - Motorola VC5090 Product Reference Manual

2 - 34 VC5090 Vehicle Computer Product Reference Guide

Installing a Secure Digital Card

A Secure Digital (SD) card provides secondary non-volatile storage. The card holder is located on the back of the
VC5090.
To install the SD card:
Place the Main Power switch on the top of the vehicle computer to the off position.
1.
Remove and discard the eight screws securing the UPS/Memory Card door.
2.
UPS/Memory Card Door Removal
Figure 2-49
Lift the SD card retaining door.
3.
Lift Retaining Door
Figure 2-50
Position the SD card, with the contacts down, into the card holder. The SD card corner notch fits into the holder
4.
only one way.
Retaining Clip