Installing An Sd Memory Card - Motorola VC6000 Series Product Reference Manual

1 - 8 VC6000 Series Product Reference Guide

Installing an SD Memory Card

A Secure Digital (SD) memory card provides secondary non-volatile data storage. Use MMC and non-SDHC SD
memory cards. The card slot is located on the side panel of the VC6000 Series.
To install the SD memory card:
Lift up the Protective Rubber Cap that covers the Memory Card Slot.
1.
Position the SD memory card with the contacts facing the back of the VC6000 Series and insert into the
2.
Memory Card Slot. The corner notch of the SD memory card fits into the Memory Card slot only one way.
Use your a pen to push the SD memory card inwards to lock.
3.
Replace the Protective Rubber Cap to seal the Memory card slot.
4.
SD Card Installation
Figure 1-4
Installing the VC6000 Series
Refer to Chapter 2, Installation
well as installing accessories.
Protective Rubber Cap
Memory
Card Slot
SD Memory Card
for information on installing the VC6000 Series onto a vehicle or on a desktop, as