Mounting Onto An Over-Head Cage Example - Motorola VC5090 Product Reference Manual

Nuts
Lock Washers
Flat Washers
Flat Washers
Lock Washers
Cap Screws
Mounting the VC5090 onto an Over-Head Cross-Beam Example
Figure 2-7

Mounting onto an Over-Head Cage Example

The diagrams below illustrates a typical installation where the vehicle computer is mounted on an overhead cage.
A customer supplied mounting plate must be used that can withstand the weight of the vehicle computer under
vibration and shock. The plate must be made of stainless steel or hardened steel with the following dimensions: 3.0
in. (76.0 mm) wide, 8.66 in. (220.0 mm) long and 0.2 in. (5.0 mm) thick. The plate must be secured with hardware
or to the underside of the cage by welding.
Installation
Vehicle Cross-Beam
Mounting Bracket
2 - 7