Waking The Vehicle Computer - Motorola VC5090 Product Reference Manual

Waking the Vehicle Computer

The wakeup conditions define what actions wakeup the vehicle computer after it has gone into suspend mode. The
vehicle computer can go into suspend mode by either pressing the Power button on the Quick Access Panel or
automatically by control panel timeout settings. Tap
These settings are configurable and the factory default settings are shown in
Table 3-5 Wakeup Default Settings
Condition for Wakeup
AC power is applied.
Forklift Ignition turns on.
Forklift Ignition turns off.
VC5090 is connected to a serial device.
VC5090 is connected to a USB device.
VC5090 is disconnected from a USB device.
A key is pressed.
An attached scanner is triggered.
Screen is touched.
Wireless LAN activity is detected.
A headset is connected to the VC5090.
> >
Settings Control Panel
Table
Power Button
No
No
No
No
No
No
No
No
No
No
No
Operating the VC5090 3 - 17
> icon > tab.
Power Wakeup
3-5.
Automatic TimeOut
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
No
No
Yes