Encryption - Motorola VC5090 Product Reference Manual

4 - 16 VC5090 Vehicle Computer Product Reference Guide

Encryption

Use the
Encryption
for the selected authentication type. See
Figure 4-21 Encryption Dialog Box
Table 4-11 Encryption Options
Encryption
Open
40-Bit WEP
128-Bit WEP
TKIP
AES
(Fusion 2.5 only)
dialog box to select an encryption type. The drop-down list includes encryption types available
Table 4-12
Select (the default) when no data packet encryption is needed over the network.
Open
Selecting this option provides no security for data transmitting over the network.
Select 40-Bit WEP to use 40-bit key length WEP encryption. WEP keys are manually entered
in the edit boxes. Only the required number of edit boxes for a key length is displayed (10 Hex
digit value for 40-bit keys). Use the
The adapter uses the selected key. Note: The default Hex digit keys are visible any time they
are used. As a security precaution after setting the key values for the network, the digits are
replaced with asterisks * in the encryption key fields.
If the associated AP uses an optional passkey, the active adapter WLAN profile must use one
as well. The passkey is a plain text representation of the WEP keys displayed in the encryption
dialog box. The passkey provides an easy way to enter WEP key data without having to
remember the entire 40-bit (10 character) Hex digit string.
Select 128-Bit WEP to use 128-bit key length WEP encryption. WEP keys are manually
entered in the edit boxes. Only the required number of edit boxes for a key length is displayed
(26 Hex digit value for 128-bit keys). Use the
WEP keys. The adapter uses the selected key. Note: The default Hex digit keys are visible any
time they are used. As a security precaution after setting the key values for the network, the
digits are replaced with asterisks * in the encryption key fields.
If the associated AP uses an optional passkey, the active adapter WLAN profile must use one
as well. The passkey is a plain text representation of the WEP keys displayed in the encryption
dialog box. The passkey provides an easy way to enter WEP key data without having to
remember the entire 128-bit (26 character) Hex digit string.
Select this option to use Wireless Protected Access (WPA) via TKIP. Manually enter the
shared keys in the passkey field. Tap
character string.
Select this option to use Advanced Encryption Standard (AES). Manually enter the shared
keys in the passkey field. Tap Next to display the passkey dialog box. Enter an 8 to 63
character string.
for these encryption types.
Description
drop-down list to configure the four WEP keys.
Key Index
drop-down list to configure the four
Key Index
to display the passkey dialog box. Enter an 8 to 63
Next