Using Sd Card - Motorola VC5090 Product Reference Manual

Figure 7-15 Load Terminal Window - Serial and Ethernet Tabs
In the
15. Image Files To Load
In the field, select the port on the vehicle computer that the development computer is connected to.
16. Comm Port
In the field, select the baud rate. Only available on serial RS232 downloads.
17. Baud Rate
Click .
18. Download
During download, the
19.
When complete,
20. Device Status
On completion, press
21.
To exit IPL, select the
22.

Using SD Card

NOTE If you are using an SD card to load a hex image onto the vehicle computer, you must first copy the files to the
SD card and install the SD card into the memory slot on the back of the vehicle computer. See
Secure Digital Card on page 2-34
To load the hex files on to the vehicle computer:
Install the SD card. See
1.
Press and hold the
2.
Hold the
3. Backlight Control
When the
4. Initial Program Loader
field, select the hex file or files to download.
screen on vehicle computer displays the
Downloading
displays
Result was Success
to return to the IPL menu to select the next partition to download.
P2
item from the IPL menu.
System Reset
for instructions for installing an SD card.
Installing a Secure Digital Card on page 2-34
button on the control panel.
Backlight Control
button until the vehicle computer resets into IPL mode.
menu appears, release the
Application Development and Deployment 7 - 15
Device Status
, or in the case of an error, the cause of the error.
for instructions for installing an SD card.
button.
Backlight Control
and a progress bar.
Installing a