User Certificate Selection
If you checked the
User Certificate
authentication type, the
currently installed certificates before proceeding. The selected certificate's name appears in the drop-down list. If
the required certificate is not in the list, install it.
Figure 4-10
Installed User Certificates Dialog Box
User Certificate Installation
To install a user certificate (EAP TLS only) and a server certificate for EAP TLS and PEAP authentication:
Tap
1.
Install Certificate
*********
Figure 4-11
Credentials Dialog Box
Enter the
,
2.
User:
Pwd:
Tap
. A
3.
Retrieve
Progress
Tap
to exit.
4.
ok
After the installation completes, the
drop-sown for selection.
NOTE To successfully install a user certificate, the vehicle computer must already be connected to a network from
which the server is accessible.
Server Certificate Selection
If you select the
Validate Server Certificate
Installed Server Certificates
list. If the required certificate is not listed, install it:
Tap the
1.
Install Certificate
check box on the
dialog box displays. Select a certificate from the drop-down list of
Installed User Certificates
. The
dialog box appears.
Credentials
(password), and
Server:
dialog indicates the status of the certificate retrieval.
Installed User Certs
check box, a server certificate is required. Select a certificate on the
dialog box. An hour glass may appear as the wizard populates the existing certificate
button.
Tunneled Authentication
information in their respective text boxes.
dialog box displays and the certificate is available in the
Wireless Applications 4 - 11
dialog box or if
is the selected
TLS