2 - 18 VC5090 Vehicle Computer Product Reference Guide
Release the quick release tabs to insert the alignment pins through an alignment hole on each of the brackets.
4.
Insert the keyboard locking knobs through the brackets and screw into the keyboard.
5.
Flat Washer
Lock Washer
Locking Knob
Attaching the Keyboard
Figure 2-18
Tighten the locking knobs.
6.
Plug the keyboard cable into the USB/Keyboard connector on the back of the VC5090.
7.
USB/Keyboard Connector
Keyboard Port
Figure 2-19
Adjusting the Keyboard
To adjust the keyboard:
Loosen the locking knobs.
1.
Alignment Pin
Retracted
Holes
Alignment
Pin
Keyboard Cable
Screw Hole