Key Entry Page; Passkey Dialog - Motorola VC5090 Product Reference Manual

Table 4-12 Encryption / Authentication Matrix
Authentication
None
EAP TLS
PEAP
LEAP
TTLS

Key Entry Page

If you select either
40-Bit WEP
check box was selected in the
Passkey
box will be shown only if the authentication is set to
Enter the 40-bit or 128-bit keys into the fields.
1.
Tap .
2. Next
40-Bit WEP Keys Dialog Box
Figure 4-22 40-Bit and 128-Bit WEP Keys Dialog Boxes

Passkey Dialog

When you select as an authentication and
None
checking the
Use PassKey
checkbox is only available if the authentication is
When you select as an authentication and
None
enter a passkey if the encryption is
When you select as an authentication and
None
enter a passkey if the encryption is
Open
Yes Yes
No Yes
No Yes
No Yes
No Yes
or the wizard proceeds to the key entry dialog box unless the
128-Bit WEP
dialog box (see
Encryption
None
128-Bit WEP Keys Dialog Box
WEP
check box. The user is prompted to enter the passkey. For WEP, the
None
TKIP
and the authentication is anything other than
TKIP
as an encryption, you must enter a passkey. The user cannot
AES
and the authentication is anything other than
AES
Encryption
WEP TKIP
Yes
Yes
Yes
Yes
Yes
Figure 4-21 on page
. To enter the key information:
as an encryption, you can choose to enter a passkey by
.
as an encryption, you must enter a passkey. The user cannot
Wireless Applications 4 - 17
AES
(Fusion 2.5 only)
Yes
Yes
Yes
Yes
Yes
Use
4-16). The dialog
Key Entry
Use PassKey
.
None
.
None