Enable/Disable The Scanner - Motorola VC5090 Product Reference Manual

2 - 30 VC5090 Vehicle Computer Product Reference Guide
Barcode Settings Window
Figure 2-45
Enter or select configuration parameters as required:
12.
• Prefix - Appends the data entered in this field to the beginning of the bar code data.
• Suffix - Appends the data entered in this field to the end of the bar code data.
• Allow Escapes in prefix/suffix - Allows the prefix and suffix data to contain escape keys.
• Send barcode data - when enabled, the barcodes data is sent to the vehicle computer.
• Send barcode data as ASCII - when enabled, the barcodes data is sent in the ASCII format.
• Send Enter key after suffix - when enabled, an Enter character is appended to the end of the bar code data.
• Send TAB key after suffix - when enabled, an Tab character is appended to the end of the bar code data.
Tap .
13. OK

Enable/Disable the Scanner

To enable or disable the scanner:
Tap the
1. SerialWedge
Select >
Scan
scanner beeps to indicate that it is receiving power.
or
Select >
Scan
icon in the task tray.
from the pop-up menu to enable the scanner if it had previously been disabled. The
Enable
from the pop-up menu to disable the scanner if it had previously been enabled.
Disable