2 - 22 VC5090 Vehicle Computer Product Reference Guide
Double-tap the
4.
Tap the
5.
SerialWedge
Select
6.
Configuration
Port Selection Window
Figure 2-26
Select the COM port radio button to match the COM port that you connected the scanner cable to (COM1 or
7.
COM2).
Tap
.
8.
OK
Verify that the scanner is connected properly. See
9.
Connecting an DS/LS3408 USB Scanner
To connect a DS3408 or LS3408 USB scanner to the VC5090:
NOTE Refer to the scanner Product Reference Guide for information on configuring the scanner.
The USB scanner cable connects to the USB/Keyboard connector. If the optional keyboard is used on the
VC5090 Full-screen configuration, you are not allowed to connect a USB scanner on the rugged USB port.
Connecting a USB scanner to the USB A port is not recommended.
Connect the appropriate USB scanner cable to the scanner.
1.
Connect the USB scanner cable to the USB/Keyboard connector.
2.
icon
SerialWedge
icon
in the task tray.
>
from the pop-up menu. The
Port Selection
on the desktop to launch the application.
Port Selection
Verifying the Scanner is Working Properly on page
window appears.
2-31.