Chapter 2 Installation; Introduction; Installing A Micro Sd Card - Motorola VC70N0 Product Reference Manual

Chapter 2 Installation

Introduction

This chapter describes how to install the vehicle computer in a vehicle or on a desktop and connecting the vehicle
computer to a power source. There are different installation options depending on the type of vehicle. This chapter
also describes how to install the various accessories for the vehicle computer. Read all of the following instructions
before you begin.
!
WARNING
CAUTION

Installing a Micro SD Card

A micro SD (Secure Digital) card provides secondary non-volatile storage. The card holder is located on the right
side of the VC70 under the Service door.
To install the micro SD card:
Remove the two screws securing the Service door.
1.
The vehicle computer and bracket must be firmly secured to a surface that can support the
vehicle computer's weight.
A competent engineer must perform the installation in a vehicle. Improper installation can damage your
vehicle and/or the VC70.
Do not install the vehicle computer in a location that will affect vehicle safety, driveability, or visibility.