Connecting a DS/LS3478 USB Scanner
NOTE Refer to the scanner Product Reference Guide for information on configuring the scanner.
To connect a DS3478 or LS3478 USB scanner to the VC5090:
Connect the USB scanner cable to the FL3478 cradle.
1.
Connect the USB scanner cable to the USB/Keyboard connector.
2.
USB/Keyboard Connector USB Cable
Connecting USB Scanner to Keyboard Connector
Figure 2-32
Scan the Pair bar code on the cradle.
3.
Scan the Set All Defaults bar code.
4.
Set All Defaults Bar Code
Figure 2-33
Scan the HID Keyboard Emulation bar code.
5.
HID Keyboard Emulation Bar Code
Figure 2-34
Scan the Simple COM Port Emulation bar code.
6.
Simple COM Port Emulation Bar Code
Figure 2-35
Installation 2 - 25