Ip Mode; Ip Address Entry - Motorola VC5090 Product Reference Manual

4 - 18 VC5090 Vehicle Computer Product Reference Guide
Figure 4-23 Passkey Dialog Box
Tap . The
Next

IP Mode

IP Mode
Use the dialog box to configure network address parameters: IP address, subnet, gateway, DNS, and
IP Mode
WINS.
Figure 4-24 IP Config Tab (DHCP)
Table 4-13 IP Mode Options
Encryption
DHCP
Static
Select either
DHCP
dialog box. Selecting

IP Address Entry

Use the
IP Address Entry
Figure 4-25 Static IP Address Entry Dialog Box
dialog box displays.
Select Dynamic Host Configuration Protocol (DHCP) from the
a leased IP address and network configuration information from a remote server. DHCP is the
default setting for the vehicle computer profile. When DHCP is selected, the IP address fields
are read-only.
Select to manually assign the IP, subnet mask, default gateway, DNS, and WINS
Static
addresses the vehicle computer profile uses.
or from the drop-down list and tap
Static
displays the
DHCP Transmit Power
dialog box to enter the IP address and subnet information.
Description
IP Mode
. Selecting
Next Static IP
dialog box.
drop-down list to obtain
displays the
IP Address Entry