Mounting Onto An Over-Head Cross-Beam Example - Motorola VC5090 Product Reference Manual

Vehicle computer
Hide thumbs Also See for VC5090:
Table of Contents

Advertisement

2 - 6
VC5090 Vehicle Computer Product Reference Guide
Important Fixing Information
CAUTION
• Mounting surface must be flat and stiff and it must extend evenly for the entire length of the mounting bracket
surface.
• All four mounting holes must be used.
• All nuts and bolts must be checked periodically and tightened if required.
• When installing the vehicle computer, care must be taken to ensure that the mounting bracket footprint is fully
supported. Additional plates may be required to achieve this.
• Do not mount the vehicle computer with the mounting bracket perpendicular to a wall as shown in
Incorrect Mounting
Figure 2-6

Mounting onto an Over-Head Cross-Beam Example

The diagram below illustrates a typical installation where the vehicle computer is mounted onto a cross-beam.
Any modification to supplied mounting bracket could cause failure of the unit and/or mountings.
Figure
2-6.

Advertisement

Table of Contents
loading

Table of Contents