Backlight Control Button; Programmable ("P") Keys - Motorola VC5090 Product Reference Manual

Table 3-2 COMM LED Indicator (Continued)
LED State
Slow Blinking (once every 1.6 seconds)
Off

Backlight Control Button

The Backlight Control button places the Quick Access Panel's
mode where you can adjust the brightness of the display or turn on/off the keyboard backlight. See
Brightness on page 3-9

Programmable ("P") Keys

The programmable keys on the Quick Access Panel (
• launching an application
• simulating a key press
• toggling the SIP keyboard
• enabling and disabling the touch screen
• toggling the keyboard backlight
• playing a key sequence
• launching the calibration screen.
NOTE These settings are not persistent across a cold boot.
To set a programmable key:
Tap >
1. Settings
appears.
Programmable Keys Screen, Key Drop-Down Menu
Figure 3-3
In the drop-down menu, select the P key you would like to program.
2. Key:
In the drop-down menu. select the function you would like the P key to perform.
3. Action
Good WLAN signal.
Poor WLAN signal. Radio is not associates with an AP. Radio is
disabled. COMM LED is disabled.
for more information.
> >
Control Panel Programmable Keys
Indication
, and buttons into the backlight control
P1 P2 P3
, , ) can be set to perform certain functions, such as:
P1 P2 P3
icon. The
Configure Programmable Keys
Operating the VC5090
Adjusting the
window
3 - 3