Installing The Vehicle In-Motion Detector; Normally Closed Switch; Normally Open Switch; Operation - Motorola VC5090 Product Reference Manual

Vehicle computer
Hide thumbs Also See for VC5090:
Table of Contents

Advertisement

RF Settings Tab Window
Figure 2-54
Tap the
6.
RF Settings
Tap the
7.
External Antenna
Tap
.
8.
OK

Installing the Vehicle In-Motion Detector

The optional Vehicle In-Motion Detector cable blanks the screen and disables use of the vehicle computer when
the vehicle is in motion.

Normally Closed Switch

The customer must install a switch that is engaged when the vehicle accelerator pedal is not depressed (See
Figure 2-55 on page
the vehicle computer indicating that the pedal is not depressed. When the accelerator pedal is depressed the
switch disengages and the signal removed. The screen blanks and the touch screen and keyboard are disabled.

Normally Open Switch

NOTE This feature is only available on vehicle computers with OEM version 05.26.0000 or higher. See
Configurations on page xiv
The customer must install a switch that is disengaged when the vehicle accelerator pedal is not depressed (See
Figure 2-56 on page
the vehicle computer indicating that the pedal is not depressed. When the accelerator pedal is depressed the
switch engages and a signal is sent to the vehicle computer. The screen blanks and the touch screen and
keyboard are disabled.

Operation

Whenever the vehicle is in motion (accelerator pedal is depressed) and the Terminal Locking feature is enabled,
the vehicle computer display blanks. When the accelerator pedal is not depressed, the vehicle computer does not
unlock immediately. Instead, the
continues to remain locked. This ensures that the vehicle computer doesn't unlock and lock during any momentary
disengagement of the accelerator pedal. While the
backlight and keyboard are disabled. After this timer expires, the
tab.
radio button.
2-38). When the pedal is not depressed, the switch is activated (closed) and sends a signal to
for instructions to determine the OEM version of the software.
2-39). When the pedal is not depressed, the switch is inactive (open) and no signal is sent to
Complete Lockup Timeout
timer initiates during which the vehicle computer
Complete Lockup Timeout
Screen Blank Timeout
Installation 2 - 37
timer is running, the touch screen,
timer initiates. While this

Advertisement

Table of Contents
loading

Table of Contents