Timing Gears and Flywheel
t
Figure 40
Removing oil seal case
t
Figure 41
Removing tappets
t
Figure 42
Removing speedometer driven gear
48 / 195
48 / 195
15.3 Oil seal case removal
Remove the bolts that hold the oil seal case in position.
Remove the case from the cylinder block with a
screwdriver or the like.
CAUTION
Do not cause damage to the oil seal.
15.4 Tappet removal
Remove the tappets from the cylinder block with a
valve push rod.
The valves, retainers, springs and valve locks must
be set aside separately in groups, each tagged for
cylinder number, for correct installation.
15.5 Speedometer driven gear
removal
Remove the lock plate and speedometer driven gear in
that order.
Unless the speedometer driven gear is removed, the
camshaft cannot be removed.
ENGLISH
Service Manual Mitsubishi SL-Series diesel engines
DISASSEMBLY
NOTE
NOTE
Version 08/2004