Mitsubishi S3L Service Manual page 84

Cylinder Block, Crankshaft, Pistons and
Oil pan
Figure 116 Installing front and rear bearing caps
Figure 117 Tightening bolts holding main bearing
caps
Figure 118 Checking crankshaft for rotation
84 / 195 84 / 195
CAUTION
Install the front and rear bearing caps in position so
their end faces are even with the end faces of the
cylinder block.
4. Tighten the bolts holding the main bearing caps in
steps to the specified torque.
Tightening torque
5. Make sure the crankshaft rotates freely without
binding or catching.
6. Measure the end play for the crankshaft. Make
reference to "End play measurement for
crankshaft" (page 42). If the end play is incorrect,
loosen the bolts holding the main bearing caps
once and tighten them again.
ENGLISH
Service Manual Mitsubishi SL-Series diesel engines
ASSEMBLY
5.25 ± 0.25 kgf·m
(38 ± 2 lbf·ft)
[51.5 ± 2.5 N·m]
Version 08/2004