Fuel Injection Nozzles; Injection Pressure (Valve Opening Pressure) Test; Orifice Restriction Test; Nozzle Tip Washing And Replacement - Mitsubishi S3L Service Manual

MAINTENANCE
Figure 269 Installing fuel injection nozzles
Service Manual Mitsubishi SL-Series diesel engines
Version 08/2004

FUEL INJECTION NOZZLES

MAINTENANCE
53 FUEL INJECTION
NOZZLES
53.1 Injection pressure (valve
opening pressure) test
See FUEL INJECTION NOZZLE (page 148).

53.2 Orifice restriction test

Make reference to FUEL INJECTION NOZZLE
(page 149).
53.3 Nozzle tip washing and
replacement
Make reference to FUEL INJECTION NOZZLE
(page 149).

53.4 Installation

1. Put the gasket on the injection nozzle.
2. Put the nozzle in position in the cylinder head and
tighten it to the specified torque.
Tightening torque
ENGLISH
5.5 ± 0.5 kgf·m
(40 ± 4 lbf·ft)
[54 ± 5 N·m
183 / 195