Lubrication And Maintenance Chart - Mitsubishi S3L Service Manual

LUBRICATION AND MAINTENANCE CHART

Interval
Every 10 Service Hours
[Pre-Start Inspection]
Every 50 Service Hours
First 50 Service Hours
of New or
Reconditioned Engine
Every 100 Service
Hours
Every 250 Service
Hours or once a year
(whatever comes first)
Every 500 Service
Hours
Every 1000 Service
Hours
Table 6 Lubrication and maintenance charts
170 / 195 170 / 195
Item
Walk-around inspection
Check engine oil level
Check fuel level
Check coolant level
Drain water and sediment from the fuel
tank and water separator
Check the battery electrolyte level and
specific gravity
Change engine oil
Change oil filter
Retighten nuts and bolts
Clean fuel filter element
Clean radiator fins
Change engine oil
Change oil filter
Check and adjust valve clearance
Change fuel filter element
Check and adjust injection pressure
Check and adjust fan belt
Check glow plugs
Retighten nuts and bolts
Check starter
Check alternator
Check turbocharger
MAINTENANCE
46 LUBRICATION AND
MAINTENANCE CHART
Recommended service should be performed at the
specified intervals. Under extremely severe, dusty or
wet operating conditions, more frequent lubrication
than is specified in this chart may be necessary.
Perform service on items at multiples of the original
requirement. For example, at Every 500 Service
Hours, also service those items listed under Every 100
(250) Service Hours, Every 50 Service Hours and
Every 10 Service Hours.
Remarks (specifications)
See operation manual
See operation manual
See operation manual
See operation manual
See operation manual
See SPECIFICATIONS (page 16)
After cleaning, prime
See operation manual
See SPECIFICATIONS (page 16)
0.25 mm (0.0098 in.) for both inlet and
exhaust valves
After changing, prime
140 kgf/cm
Deflection: 13 mm (0.5 in.)
See turbocharger manual
ENGLISH Service Manual Mitsubishi SL-Series diesel engines
MAINTENANCE
2
(1 991 psi) [13 729 kPa]
Page
172
173
173
191
181
173
173
175
180
183
184
133
191
115
122
Version 08/2004