Fuel System; Fuel Injection Pipe Removal; Fuel Injection Nozzle Removal; Governor Assembly Removal - Mitsubishi S3L Service Manual

DISASSEMBLY
t
Figure 20 Removing fuel injection pipes
t
Figure 21 Removing fuel injection nozzles
t
Figure 22 Removing governor assembly
Service Manual Mitsubishi SL-Series diesel engines
Version 08/2004
DISASSEMBLY

11 Fuel System

11.1 Fuel injection pipe removal

Disconnect the fuel injection pipes and fuel leak-off
pipe from the fuel injection pump and nozzles.
NOTE
Put plugs or caps on the openings of the injection
pump and nozzle connectors.

11.2 Fuel injection nozzle removal

Loosen the fuel injection nozzles with a wrench.
Remove the nozzles and gaskets from the cylinder
head.
NOTE
Remove the gaskets from the cylinder head with a
screwdriver or a similar tool. Discard defective
gaskets.

11.3 Governor assembly removal

1. Remove the tie rod cover.
2. Remove the spring from the tie rod with a pliers to
disconnect the tie rod from the fuel injection pump.
3. Remove the governor assembly.
ENGLISH
Fuel System
39 / 195